display the time and "
"
"
Under the child safety lock mode, you can unlock it by pressing and
holding the child lock button "
In the child safety lock mode, except for pressing and holding the
power button to turn off, as well as press and hold the child lock button
to unlock, the other buttons are invalid.
Setting cooking times for multiple zones
The timer can be timed separately for any cooking zone, and the timing of each
cooking zone is independent of each other.
Single cooking zone timing
When setting a countdown time for a cooking zone, press timer button"
first, the digital tube decimal point "
on. The decimal point of timer digital tube "
the set timer has been related with the selected cooking zone. At this time,
you can use the plus button and minus button to set the countdown time.
Several cooking zones timing
Each timer setting operation will be same as "Single cooking zone timing".
Press any cooking zone selection button, and the timer digital tube display the
timing value of that cooking zone.
When multiple burners are timed, you can switch the timing of different burners
by pressing the time button "
When not selecting any cooking zone, the digital tube will show the minimum
timer value of cooking zones, and the digital tube of corresponding cooking
zone will show "
" alternately. If not, it will display "
".
".
" for about 3 seconds.
"of the selected cooking zone will be
"will display, and to indicate
EN-19
" and
"