Signature STV4F Manuel D'utilisation page 49

USING THE CERAMIC HOB
Before first use
IMPORTANT: You should clean the ceramic hob surface (see
"Cleaning and maintenance" section).
You should switch on one cooking zone at a time, for 5 minutes at the

maximum setting. This will help to eliminate any new smell that exists and
evaporate any humidity that has formed on the heating elements during
transit.
Do not burn off more than one zone at once.

You must place a saucepan filled half full with cold water on each zone

as you burn it off.
Power on
After switch on the appliance, the hob will beep for once to remind

power on,all of the indicator digital tubes on the display screen will lit on
for 2s, then the appliance goes into shutdown mode.
Shutdown status: All the display will close except the high temperature

warning symbol "
operated by pressing and holding, and other button operations are
invalid.
Standby mode
Under shutdown status, press and hold "

beep for once and then enter standby mode.
All t he i ndicator digital t ubes o f t he c ooking z one w ill display "

symbol "
heat), timer place will show "
"; At this time, only the power button "
" will show in the cooking zone indicator if there is residual
" button for 3s, the hob will
" as well, it will not heat at this time.
EN-14
" can
"(The