Signature STV4F Manuel D'utilisation page 46

Fix the brackets(4 pcs) on the left side and right side by screw. Put the

hob in the cut-out cabinet, and make it centered. Ensure that the front
edge of the hob is parallel to the side edge of the work surface.
screw
bracket
Make an opening with the dimensions given in the diagram for the

hob to be mounted on the worktop．
Check seal for perfect fit and overall cover. Lower the electric hob into

into place and align correctly.
Cut a hole in the worktop that corresponds with the drawing shown

above .
screwhole
EN-11
hob top
worktop
bracket
screw