Replacing the mains supply cable
If the mains supply cable is damaged, then it must be replaced by an
appropriate replacement.
The mains supply cable should be replaced in accordance with the
following instructions:
Switch the appliance off at the control switch.
Open the terminal block on the underside of the hob.
Unscrew t he t erminal sc rews f ixing the cable.
The "green-yellow" earth wire must be connected to the terminal
It must be about 10 mm longer than the live and neutral wires.
The "blue" neutral wire must be connected to the terminal marked with
letter ( N) - the live wire must be connected to the terminal marked with
letter (L).
EN-13
.