Traeger TFB78GZE Manuel Du Propriétaire page 11

SEASONING YOUR GRILL
TO BE USED ON INITIAL FIRING ONLY.
auger by allowing the auger tube to be "charged" with pellets.
1
PLUG APPEARANCE MAY VARY BY REGION.
With the Main Power switch in the OFF (O) position, plug
the power cord into an appropriate grounded/earthed
electrical outlet.
3
Turn grill on: Flip the Main Power switch on the back of
the grill to ON (I), press any button on the control panel
to activate the WiFIRE® Electronic Controller. After
a few seconds, the home screen will display.
NOTE:
The seasoning reminder will display the first few
times you power up the grill. However, you only have to
season your grill upon initial start-up.
In order to ensure proper operation of the grill, you must first prime the
2
Make sure there are no foreign objects in the auger before
adding pellets to the hopper.
HARDWOOD PELLETS, which are specifically made
to work in our grills. Never use heating fuel pellets in
the grill.
4
Press MENU to display the main menu. Turn the dial to
select AUGER, then select Prime Auger.
The auger tube will take a few minutes to fill with pellets
and begin dispensing into the firepot. Your grill display will
tell you the specific time. Once pellets begin to fall into the
firepot, select Done to turn off the auger. You only need a
few pellets in the firepot to season your grill.
11
WARNING!
Use ONLY TRAEGER® BRAND
AUGER
>Prime Auger
>Clear Auger
>Back
TRAEGERGRILLS.COM