Häfele DT 400c FH Mode D'emploi page 50

8.3 Programming a user key with deadbolt lock function
Prerequisites:
1. Hold the programming key card in front of the
antenna.
► Acoustic signal is heard. LED flashes white
for max. 5 seconds.
3. Hold the programming key card in front of the
antenna again during the 5-second period.
► Acoustic signal is heard again twice. LED
flashes white even more slowly.
5. Remove user key.
► LED continues to flash white slowly.
7. Repeat steps 4 to 6 until all necessary user keys have been granted the locking authorisation.
8. The LED switches off once the 5 seconds have elapsed.
50
Programming key card
5 s
2. Hold the programming key card in front of the
2x 1 x/s
4. Hold the user key in front of the antenna within
1 x/s
6. Hold another user key in front of the antenna
User key
antenna again during this 5-second period.
► Acoustic signal is heard twice. LED flashes
white more slowly.
5 seconds.
► Acoustic signal is heard. LED briefly lights
up white.
► Locking authorisation is allocated.
during the 5-second period.
► Acoustic signal is heard. LED briefly lights
up white.
► Locking authorisation is allocated.
2x 2x/s
1 s
1 s