Häfele DT 400c FH Mode D'emploi page 48

8.1 Programming a normal user key
Prerequisites:
1. Hold the programming key card in front of the
antenna.
► Acoustic signal is heard. LED flashes white
for max. 5 seconds.
3. Remove user key.
► LED continues to flash white for 5 seconds.
5. Repeat steps 2 to 4 until all necessary user keys have been granted the locking authorisation.
6. The LED switches off once the 5 seconds have elapsed.
48
Programming key card
5 s
2. Hold the user key in front of the antenna during
this 5-second period.
► Acoustic signal is heard. LED briefly lights
► Locking authorisation is allocated.
5 s
4. Hold another user key in front of the antenna
during this 5-second period.
► Acoustic signal is heard. LED briefly lights
► Locking authorisation is allocated.
User keys
up white.
up white.
1 s
1 s