Ditel MICRA-M Manuel De L'utilisateur page 74

PROCESS INPUT PROGRAMMING
As process indicator it is designed to measure all kinds of process variable with direct indications in engineering
units.
The parameter to configure as process indicator is the input type, in volts in a -10 V to 10 V range and in milliam-
peres in a -20 mA to 20 mA range.
TRANSDUCER WIRING (V, mA)
Refer to wiring guidelines in Page. 75
Instrument's rear view
KOSMOS SERIE
CN2
PIN 1 = -EXC
PIN 2 +EXC
PIN 3 = +EXC
PIN 4 = N/C
PIN 5 = +IN
PIN 6 = +IN
PIN 7 = N/C
PIN 8 = -IN
www.ditel.es
MICRA-M
[excitation output (-)]
[excitation output +24V (+)]
[excitation output +5V or 10V (+)]
[no connection]
[input mA (+)]
[input V (+)]
[no connection]
[input V (-), mA(-)]
74