Ditel MICRA-M Manuel De L'utilisateur page 69

MAINTENANCE
To guarantee the precision of the instrument, it is advisable to verify its compliance in accordance with the
technical specifications contained in this manual, performing calibrations at regular periods of time that will be set
according to the criteria of use of each application.
The calibration or adjustment of the instrument must be carried out by an Accredited Laboratory or directly by the
Manufacturer.
The repair of the equipment must be carried out only by the manufacturer or by personnel authorized by it.
To clean the front of the equipment, simply rub it with a cloth soaked in neutral soapy water.
DO NOT USE SOLVENTS!
WARRANTY
The instruments are warranted against defective materials and workmanship for a period of FIVE years
from date of delivery.
If a product appears to have a defect or fails during the normal use within the warranty period, please
contact the distributor from which you purchased the product.
This warranty does not apply to defects resulting from action of the buyer such as mishandling or
improper interfacing.
The liability under this warranty shall extend only to the repair of the instrument. No responsibility is
assumed by the manufacturer for any damage which may result from its use.
INSTRUCTIONS FOR THE RECYCLING
This electronic instrument is covered by the 2002/96/CE European Directive so, it is properly
marked with the crossed-out wheeled bin symbol that makes reference to the selective collection for
electrical and electronic equipment which indicates that at the end of its lifetime, the final user cannot
dispose of it as unsorted municipal waste.
In order to protect the environment and in agreement with the European legislation regarding waste
of electrical and electronic equipments from products put on the market after 13 August 2005, the
user can give it back, without any cost, to the place where it was acquired to proceed to its controlled
treatment and recycling.
KOSMOS SERIE www.ditel.es
MICRA-M
69