Ditel MICRA-M Manuel De L'utilisateur page 73

Programming guide
The different steps to be followed for a correct programming of each type of function are detailed below. The
reading and application of some paragraphs are obligatory (O), recommendable (R) or optional (op).
As Process indicator:
1. Input Configuration, Page. 74 (O).
2. Input Connection, Page. 75 (O).
3. Display Configuration, Page 79 (O).
4. Program remote inputs, Pag. 84 (R).
5. Install and configure output option(s) Page. 87 (op)
6. Programming lock-out, Page. 85 (R).
As Load cell indicator
1. Input Configuration, Page. 76 (O).
2. Input Connection, Page. 76 (O).
3. Display Configuration, Page. 79 (O).
4. Program remote inputs, Pag. 84 (R).
5. Install and configure output option(s) Page. 87 (op).
6. Programming lock-out, Page. 85 (R).
INPUT CONFIGURATION
The figure below shows the input configuration menu. Divided into four submenus, each one of them separated by
the dotted line in the manual, each menu corresponds to the programming of the different types of input: process,
load cell, thermometer Pt100 and thermometer thermocouple. The data requested in each case are indicated below.
KOSMOS SERIE
As thermometer Pt100:
1. Input Configuration, Page. 77 (O).
2. Input Connection, Page. 77 (O).
3. Program remote inputs, Pag. 84 (R).
4. Install and configure output option(s) Page. 87 (op).
5. Programming lock-out, Page. 85 (R).
As thermometer thermocouple:
1. Input Configuration, Page. 78 (O).
2. Input Connection, Page. 78 (O).
3. Program remote inputs Pag. 84(R).
4. Install and configure output option(s) Page 87 (op).
5. Programming lock-out, Page. 85 (R).
www.ditel.es
MICRA-M
73