Publicité
Les langues disponibles
Les langues disponibles
How to get into programming mode
First, plug the instrument to the corresponding supply, automatically a display test will be done and after that the soft-
ware version will be shown then the instrument will go to work mode. Second, press the
programming mode, the indication "-Pro-" will appear on the display then.
How to store programmed parameters?
If we want to save the changes that we have done in the programming, we must complete the programming of all the
parameters contained in the routine we are in. In the last step of the routine, as a result of pressing on the
"StorE" will de displayed during a few seconds, meanwhile all the data are stored in memory. Then the instrument will
go back to working mode.
How is programming routine organised?
Programming software is composed by a number of menus and submenus hierarchically organized. On figure below,
beginning with indication "-Pro-", press repeatedly
only be shown if the option for setpoints, analogue output, RS option or Ethernet option has been plugged in. Selecting
one menu, the access to the different programming submenus is done by pressing
Accessing to programmed parameters
Thanks to the tree structure, the programming routines allow to access to change one parameter without passing
through the whole list of parameters.
To advance through programming
The progress through the programming routines is done by pressing
In general, the steps to be done will be push
key to validate the change and going forward to the next step of the program.
The numerical values are programmed digit by digit as explained in the next paragraph.
Programming numerical values
When the parameter is a numerical value, the display will show the first of the digit to be programmed blinking.
The method of introducing a value is as follow:
Digit selecting: Press repeatedly the
Changing the digit value: Press repeatedly the
sired value.
The minus sign is programmed depending on the variable type. A variable that represents the value of an input will be
able to take a value in the range -19999 to 99999, without taking into account the decimal point. When change the
first digit, this shows values from (0) to (9), and then (-1), (-), and comes back to show values from 0 to 9.
A variable that represents a display value will be able to take a value in the range -19999 to 99999, without taking into
account the decimal point.
Selecting an option from the list
When the parameter is an option to be chosen among different possibilities, the
through the list of options until you find the desired parameter
KOSMOS SERIE
to get access to programming menus. Modules 3, 4 and 5 will
key a certain number of times to select an option and push
key to shift from left to right over all the display digits.
key to increase the value of blinking digit until it has the de-
www.ditel.es
MICRA-M
key to enter into the
.
key.
key allows you to browse
key,
71
Publicité
