Publicité
1. Quick fastener (× 2)
1. Fixation rapide (× 2)
1. Fijador rápido (× 2)
1. Panel E
1. Cache E
1. Panel E
2. Panel C
2. Cache C
2. Panel C
2. Bolt (× 3)
2. Boulon (× 3)
2. Perno (× 3)
To install
1. Place the panel in the original position and in-
stall the quick fasteners.
2. Place the carrier in the original position and
install the carrier bolts under the fenders.
3. Install the top carrier bolts, and then tighten
all bolts to the specified torques.
Tightening torque:
Carrier bolt (top):
34 Nm (3.4 m·kgf)
Carrier bolt (under fenders):
7 Nm (0.7 m·kgf)
Panel E
To remove
Remove the bolts, and then take the panel off.
To install
Place the panel in the original position, and then
install the bolts.
8-25
EBU01013
Publicité
