SilverCrest SDM 1500 D3 Manuel D'utilisation page 24

The filling aperture must not be
open during use.
Burn hazards
m DANGER! Risk of burns!
Do not touch hot surfaces and
beware of escaping steam. Hold
the product by its handle only.
Steam is very hot. Never put your
hands in front of the steam jet.
Operation
Only use the product in dry
indoor rooms.
The plug must be removed from
the wall socket before the water
tank is filled with water.
The use of extension cords is not
recommended. If the use of an
extension cord is necessary, it
must be designed for a current
flow of at least 10 A. Lay cords
in such a way that they may not
be tripped over or otherwise
damaged.
No action is needed from users to
shift the product between 50 and
60 Hz. The product adapts itself
for both 50 and 60 Hz.
Do not operate the product with
wet hands or while standing on a
wet floor. Do not touch the power
plug with wet hands.
Stop using the product if the anti-
kink protection on the power cord
is damaged!
Cleaning and storage
Always turn off the product
before disconnecting it from the
power supply.
Do not pull the power plug out
of the wall socket by the power
cord. Do not wrap the power
cord around the product.
Protect the product, its power
cord and power plug against
dust, direct sunlight, dripping and
splashing water.
Store the product in a cool, dry
place, protected from moisture
and out of the reach of children.
Protect the product against heat.
Do not place the product close to
open flames or heat sources such
as stoves or heating appliances.
˜ First use
Remove all packaging materials. Check if all
parts are complete.
˜ Assembly
˜ Unfolding/folding the handle
Handle
Unfolding Unfold the handle until it clicks in
place.
Folding
Press the folding button
fold the handle downwards.
1 ] [
. Then,
25 ] [
GB/IE 21