SilverCrest SDM 1500 D3 Manuel D'utilisation page 23

Use on waxed or some unwaxed
floors may result in diminished
glossiness.
Before use: We recommended
to perform a material test on
an isolated area of the working
surface.
Electrical safety
m DANGER! Risk of electric
shock! Never attempt to repair
the product yourself.
In case of malfunction, repairs
are to be conducted by qualified
personnel only.
m WARNING! Risk of electric
shock! Do not immerse the
product's electrical components in
water or other liquids. Never hold
the product under running water.
m WARNING! Risk of electric
shock! Never use a damaged
product. Disconnect the product
from the power supply and
contact your retailer if it is
damaged.
m WARNING! Risk of injury!
The product has to be unplugged
after use and before cleaning or
maintaining the product.
Connect the product only to an
earthed wall socket.
Always make sure that the power
20 GB/IE
plug is correctly inserted into the
wall socket.
The product is not to be used if
it has been dropped, if there are
visible signs of damage or if it is
leaking.
Before connecting the product
to the power supply, check that
the voltage and current rating
corresponds with the power
supply details shown on the
product's rating label.
Regularly check the power plug
and the supply cord for damages.
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard.
Protect the power cord against
damages. Do not let it hang over
sharp edges, do not squeeze or
bend it. Keep the power cord
away from hot surfaces and
open flames and ensure that
nobody can pull on or trip over it
unintentionally.
The product must not be left
unattended while it is connected
to the supply mains.
The liquid or steam must not
be directed towards equipment
containing electrical components,
such as the interior of ovens.