Parkside PABS 20-Li H9 Traduction Des Instructions D'origine page 6

CORDLESS DRILL DRIVER 20 V
PABS 20-Li H9
Introduction
Congratulations on the purchase of your new tool.
You have chosen a high-quality product. The oper-
ating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
This appliance is designed for screwing and drilling
into wood, plastic and metal. The appliance may
only be used as described and for the specified
application areas. Any other usage of or modifica-
tion to the appliance is deemed to be improper
and carries a significant risk of accidents. The
manufacturer accepts no responsibility for damage
caused by incorrect use of the appliance. This
appliance is not intended for commercial use.
Features
1 Speed selector switch
2 Bit holder (magnetic)
3 Rotation direction switch/lock
4 ON/OFF switch/speed control
5 Belt clip
6 Battery charge level button
7 Battery display LED
8 Battery pack*
9 Release button for the battery pack
0 LED work light
q Chuck
w Torque selection ring
e High-speed charger*
r Red charge control LED
t Green charge control LED
│ GB │ IE
■ 2
Package contents
1 cordless drill driver 20 V
1 carrying case
1 set of operating instructions
Technical data
Cordless drill driver 20 V PABS 20-Li H9
Rated voltage
Rated idle speed
Chuck clamping range
Max. drill diameter
PAP 20 A1* battery
Type
Rated voltage
Capacity
Cells
High-speed battery charger PLG 20 A1*
INPUT
Rated voltage
Rated power consumption 65 W
Fuse (internal)
OUTPUT
Rated voltage
Rated current
Charging time
Protection class
* BATTERY AND CHARGER ARE NOT SUPPLIED
20 V (DC)
1st gear n 0–430 rpm
0
2nd gear n 0–1500 rpm
0
max. Ø 13 mm
Steel 13 mm
Wood 30 mm
LITHIUM ION
20 V (DC)
2 Ah
5
230–240 V ∼, 50 Hz
(AC)
T3.15A
3.15 A
21.5 V (DC)
2.4 A
approx. 60 min
II /
(double insulation)
PABS 20-Li H9