Parkside PMBSA 20-Li A1 Traduction Des Instructions D'origine page 48

GB MT
a longer period of time or is not used
and maintained properly.
• Damage to health as a result of:
• touching the area of the grinding
tool which is not covered;
• ejection of parts of workpieces or
damaged grinding discs.
WARNING! Danger due to electro-
magnetic field generated while the ma-
chine is in operation. Under certain cir-
cumstances, this field may negatively af-
fect active or passive medical implants.
In order to reduce the danger of serious
or fatal injuries, we recommend that indi-
viduals who wear medical implants should
consult their doctor and the manufacturer
of the implant before operating the ma-
chine.
Preparation
WARNING! Risk of injury due to un-
intentional start-up. Make sure that the
device is not connected to the battery ad-
apter.
Control elements
Familiarise yourself with the operating ele-
ments before using the device for the first
time.
Control elements of the battery
adapter
• Main switch (14)
• Switching on and off: Press
• Status light
off: Battery adapter off
lights up: Battery adapter on,
device connected
flashes: Battery adapter on, no
device connected
• Rotary knob (15)
Infinitely variable speed adjustment
48
CAUTION! Risk of injury! At-
•
tachment tools can be damaged if
the speed is too high. Operate cer-
tain attachment tools at minimum
speed MIN, Attachment tool for the
multi-purpose tool, p. 49.
Control elements of the angle
grinder
• Spindle lock (5)
• Locks the spindle when attaching/
removing the attachment tool.
• On/Off switch (6)
• Switching on: Press down and push
forward
• Lock: Tilt down in front
• Switching off: Release; if locked:
press at the back
Control elements of the multi-
purpose tool
• Spindle lock (5)
• Locks the spindle when attaching/
removing the attachment tool.
• On/Off switch (6)
• Switching on: Push forward, the on/
off switch locks in place
• Switching off: Push backward
• Screw cap (10)
Conceals a thread for fastening attach-
ments.
Connecting the tool to the
battery adapter
Requirements
• Battery removed.
Procedure
1. Plug the connecting cable (16) into the
threaded coupling (8).
Pay attention to the groove on the con-
nection.