EUROM Heat-Duct-Pro HDP 3 Instructions De Service page 21

Technical data
Type
Supply voltage
Maximum capacity
Settings
Air flow
Protection class
Electrical cable
Plug
Dimensions
Weight
General safety instructions
1. Before using the machine, carefully read this entire
instruction manual. Keep this booklet in a safe place for
reference.
2. Before using your new heater, check it, including cord and
plug, for any visible damage. Do not use a damaged heater,
but send it back to your dealer for replacement.
3. This heater is exclusively intended to heat workspaces such
as workshops, garages and storage spaces. Use the
appliance for this purpose only.
4. Under the terms and conditions described in this leaflet, the
heater can be used in wet or damp indoor spaces such as
bathrooms and laundry rooms. Do not place the heater in
the vicinity ( at least 1 meter removes) of taps, bathtub,
shower, pool, fountains or other sources of moisture. Make
sure it cannot fall into water and prevent water from getting
into the heater itself. If, at any time, the heater does fall into
water, unplug it immediately! Do not use a heater that has a
damp interior but have it repaired. Never immerse the
heater, cord or plug in water and never touch it with wet
hands.
5. The supply voltage and utility frequency, specified on the
machine, need to match those of the socket that is used.
English
Heat-Duct-Pro
3
V / Hz 220-240 / 50
W 3000
W 0-3000
m³/h 389
IP24
H07RN-F
3G1,5mm²
150cm.
Schuko
cm 36,5x26,5x37
kg 6
Heat-Duct-Pro
9
400 - 3~ / 50
9000
0-4500-9000
1227
IP24
H07RN-F
5G1,5mm²
150cm
5 pole – 16A
46x31,5x42
11,7
21
Heat-Duct-Pro
15
400 - 3~ / 50
15000
0-7500-15000
1609
IP24
H07RN-F
5G2,5mm²
150cm
5 pole - 32A
71,4x47,6x53,4
27,8