KERN PCD 300-3 Mode D'emploi page 86

8.4.2 Printout
Using this function data are selected which are to be sent via the
RS232C (not valid for data transfer mode BAPr ).
 In weighing mode keep the PRINT key pressed until "Unit"
 Press the MODE key several times until „LAPr" is displayed.
 Acknowledge using SET key, the current setting is displayed.
 Select the desired output parameter by pressing the MODE key
 After actuating the SET button, the current state is displayed
 Use MODE and PRINT key to change the status
 Use the SET key to confirm selection. The balance returns to
By that way the user can configure his own data block, which then is
sent to a printer or to a PC.
38
appears.
Hdr Edition of the headlines
Edition of the total weight
GrS
Net Edition of net weight
Edition of tare weight
tAr
N7E Edition of the stored weight
PCS Edition of quantity
Edition of piece weight
AUJ
Rqt Edition of the reference quantity
Edition of a page forward feed when printout is started
FFd
FFE Edition of a page forward feed when printout is ended
( on / off ).
„on  off".
weighing mode.
PCD-BA-e-1615