Publicité
Les langues disponibles
Les langues disponibles
7.5 Pre-Tare function
M O D E
C A L
Delete PRE-TARE
value
M O D E
C A L
7.6 Plus/minus weighings
TA R E
PCD-BA-e-1615
Using this function the weight of a tare vessel is stored. Even
after turning off/on the weighing balance will continue working
with the saved tare value.
In weighing mode put tare vessel on the weighing plate
Press repeatedly the MODE key until „PtArE" flashing
appears.
Use SET key to store the current weight on the weighing
plate as a PRE-TARE value.
Unload the balance and set the TARE button to zero
Press repeatedly the MODE key until „PtArE" flashing
appears.
Use the SET key to confirm. The PRE-TARE value is
deleted, the zero display appears.
For example unit weight control, fabrication control etc.
Put the nominal weight on the weighing plate and tare
using the TARE button.
Remove the nominal weight
Put the test objects subsequently on the weighing plate,
the respective deviation from the nominal weight is
displayed with the respective sign to „+" and „-".
According to the same procedure also packages with the
same weight can be produced, referring to a nominal
weight.
Back to weighing mode by pressing the TARE button.
21
Publicité
