KERN PCD 300-3 Mode D'emploi page 80

8.3.3 Selection of adjustment weight
In the model series KERN PCD, the adjustment weight can be
selected from pre-set nominal values (refer also to following table,
factory setting with grey background). In order to achieve high-
quality weighing results in the sense of the measuring technology,
it is recommended to select the nominal value as high as
possible. The non delivered adjustment weights can be
purchased from KERN as option.
 In weighing mode keep the PRINT key pressed until [Unit]
 Press the MODE key several times until „CAL" is displayed.
 Acknowledge using SET key, the current setting is displayed.
 Select the desired settings by pressing the MODE key.
 Use the SET key to confirm selection.
Possible Adjustment Points:
Adjustment
PCD 250-3
Points
1.
2.
3.
4.
5.
Adjustment
PCD 6K-4
Points
1.
2.
3.
4.
5.
32
appears.
PCD 300-3
50 g 50 g
100 g 150 g
150 g 250 g
200 g 300 g
250 g 350 g
PCD 10K0.1
1 kg 2 kg
2 kg 5 kg
5 kg 7 kg
6 kg 10 kg
- -
PCD 2500-2 PCD 3000-2
500 g 500 g
1000 g 1500 g
1500 g 2500 g
2000 g 3000 g
2500 g 3500 g
PCD 10K3
2 kg
5 kg
7 kg
10 kg
-
PCD-BA-e-1615