KERN PCD 300-3 Mode D'emploi page 84

8.3.7 Foot switch
The foot switch is used to send the weighing values to a printer or to a PC.
Alternatively can also be tared.
Connection and operation see in the operating instructions supplied with this foot
switch.
8.3.8 Reset to factory setting
This function resets all balance settings to factory setting.
 In weighing mode keep the PRINT key pressed until "Unit"
 Press the MODE button several times until „rSt" is displayed.
 Acknowledge using SET key, the current setting is displayed.
 Select the desired settings by pressing the MODE key
rSt
rSt
 Use the SET key to confirm selection. The balance returns to
36
appears.
yes Balance will be reset to factory setting.
The balance keeps its individual setting
no
weighing mode.
PCD-BA-e-1615