Publicité
Les langues disponibles
Les langues disponibles
7.7 Parts counting
M O D E
C A L
S E T
M
22
During piece counting parts can either be counted into a
container or out of a container. To count a greater number of
parts the average weight per part has to be determined with a
small quantity (reference quantity).
The larger the reference quantity, the higher the counting
exactness. High reference must be selected for small parts or
parts with considerably different sizes.
The larger the reference quantity, the more accurate the parts
counting.
The process has four steps:
Tare the weighing container
Determine the reference unit
Original weighing of reference weight
Count the items
In weighing mode press MODE key shortly. Reference
PCS
piece number „5
By pressing the MODE button several times other
reference quantities 5, 10, 20, 25 and 50 can be called up.
Place as many pieces to count on the weighing plate as the
set reference quantity requires.
Use the SET key to confirm. The balance is now in parts
counting mode counting all units on the weighing plate.
• Back to weighing mode by
pressing the MODE button.
• Error message „Er 1"
Piece below minimum weight of piece (See chpt. 1
"Technical specifications"): Press MODE key and restart
reference determination.
• Taring
The tare vessels can also be used for piece counting.
Before starting piece counting use the TARE
button to tare out the container.
" appears flashing.
PCD-BA-e-1615
Publicité
