KERN PCD 300-3 Mode D'emploi page 72

7.9 Percent determination
M O D E
C A L
S E T
M
24
Percentage calculation facilitates weight display in percent
related to a reference weight equivalent to 100 %.
 In weighing mode press MODE key repeatedly,
until "100 %" is displayed flashing.
 Put a reference weight which corresponds to 100 %.
 Store by pressing the SET key. If the display stops
flashing, remove the reference weight.
 Place goods to be weighed on balance.
The weight of the sample is displayed in percentage in
terms of the reference weight.
Back to weighing mode by pressing the MODE button.
PCD-BA-e-1615