Packaging And Transport - Burkert 2030 Manuel D'utilisation

Type 2030, 2031, 2031 K, 2032,
2033, 2037

Packaging and Transport

14. pacKaging and TranspOrT
note!
transport damages!
Inadequately protected equipment may be damaged during transport.
• During transportation protect the device against wet and dirt in shock-resistant packaging.
• Avoid exceeding or dropping below the allowable storage temperature.
• Protect the electrical interfaces of the coil and the pneumatic connections from damage by placing protective
caps on them.
15. sTOrage
note!
incorrect storage may damage the device.
• For prolonged storage, slacken the housing screws to prevent the diaphragm from becoming distorted.
• Identify slackened screws for reasons of safety!
• Store the device in a dry and dust-free location!
• Storage temperature. -40 ... +55 °C.
Danger!
risk of injury during re-installation. risk of injury from discharge of medium through slackened housing
screws (acid, alkali, hot media)!
Before re-installing the valves, ensure that the housing screws have been tightened correctly.
• Before re-installation, check the tightening torque of the housing screws.
english
35