Télécharger Imprimer la page

Stiebel Eltron WDH 600 SBB Instructions D'installation page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 6
INSTALLATION
General information
1.
General information
1.1
Relevant appliances
Thermal insulation
- WDH 600 SBB, part number 235909
- WDH 800 SBB, part number 235910
- WDH 1000 SBB, part number 235911
As an accessory for the floorstanding DHW cylinders
SBB 600 WP SOL | SBB 800 WP SOL | SBB 1000 WP SOL
Note
Observe the operating and installation instructions pro-
vided with the appliance.
1.2
Further applicable documents
Operating and installation instructions, floorstanding
DHW cylinders SBB 600 WP SOL | SBB 800 WP SOL |
SBB 1000 WP SOL
part number 296830
2.
Fitting the thermal insulation
SBB 600 WP SOL
15
4
| WDH SBB
1
2
3
4
8
6
7
10
12
13
14
SBB 800 WP SOL | SBB 1000 WP SOL
15
1 Cover
2 Top thermal insulation section
3 Top thermal insulation ring
4 R.h. thermal insulation section
5 Cover strip
6 Rose
7 Flange thermal insulation ring
8 Thermal insulation, electric emergency/booster heater
9 Terminal cover, electric emergency/booster heater power
cable
5
10 Thermal insulation, flange
11 Flange cover
12 Connection cover (including insulation)
13 Thermal insulation section, bottom
9
14 Thermal insulation ring, bottom
15 L.h. thermal insulation section
11
f With cylinders supplied horizontally, insert the bottom ther-
mal insulation section inside the support ring, prior to posi-
tioning the cylinder. Slightly tip a vertically delivered cylinder
in order to position the bottom thermal insulation section.
f Surround the support ring with the bottom thermal insula-
tion ring and secure it with adhesive tape.
f Prior to fitting them, shape the right hand and left hand ther-
mal insulation sections into a semi-circular form for approx.
10 seconds. A pressure-activated adhesive then holds the
thermal insulation sections in the required shape and makes
fitting them easier.
Please note that the use of tensioning straps may damage the
thermal insulation.
f Place a thermal insulation ring around each flange.
f Push the thermal insulation sections over the connections on
the appliance.
1
2
3
4
6
7
10
12
13
14
www.stiebel-eltron.com
5
11

Publicité

loading

Ce manuel est également adapté pour:

Wdh 800 sbbWdh 1000 sbb