Parkside PLGS 2012 A1 Traduction Des Instructions D'origine page 34

GB MT
Here you can select between the
temperature display in degrees
Celsius and degrees Fahrenheit
• Device information
Here you will find the name of
the charger.
•
- Settings
You will find the
right after you have selected the
charger.
- Press the
you can assign a new image
to the charger under "Symbol",
you can rename the charger
under "Name" or assign a
"Location" to the charger.
- If you go to "Device informa-
tion" you can, among other
things, view the virtual ID or
WLAN signal strength.
- With "Tap to run and automa-
te" you can select and deselect
smart scenarios and automa-
tions. These have to have been
created first. See the section
"Creating a scenario".
- If you go to "Offline notificati-
on" you can be choose to be
notified when a device is off-
line for more than 30 minutes.
34
at the top
icon again and
- Under "Enable device", you
can authorize another user
from the same household to
control the charger using the
Lidl Home app.
- You can find the frequently
asked questions under "FAQ".
- Under "Check for firmware
upgrade" you can check
whether the firmware needs to
be upgraded and also per-
form the upgrade.
- The charger can be removed
from the app under "Remove
device". See also chapter
"Disconnecting the device and
deleting data from the app".
Creating a scenario
1. Select the tab
2. Select the
to create a new scenario.
3. Put together the desired
scenario and save it.
4. Select or deselect the desired
scenario either here on the
tab "Smart" or in the de-
vice settings under
run and automate".
"Smart".
at the top right
"Tap to