Parkside PLGS 2012 A1 Traduction Des Instructions D'origine page 32

GB MT
marks by pressing them.
8. Now press the
the same color as the set
check mark.
9. Enter a WLAN name and
the corresponding password
to connect the charger to the
WLAN.
10. Confirm your entry.
The charger is now connec-
ted to the app. You can re-
cognize a successful connec-
tion by the fact that the
WLAN indicator (9) lights
up blue continuously.
11. Confirm the successful
connection with "Finish".
The charger is now listed
in the tab and can be
selected.

If you have already connec-
ted other devices to the app:
5. On the tab
in the upper right. The
app scans the area for avai-
lable devices and indicates
if available devices have
been found.
32
, that has
, select the
If this is not the case,
read on if possible
6. Proceed as with
point 5.

If a list of available devices
is not automatically suggested
to you:
If the charger is not suggested
automatical suggested, follow
these steps:
5. On the tab
in the upper right.
6. Select "Other" in the bar on
the left.
7. Select "Other-1".
8. Follow the instructions in the
app.
Enter a WLAN with the
associated password and
confirm with "Next".
The app now searches for
available devices and sug-
gest them to you.
9. Select the desired charger
by pressing the
to the app.
10. First confirm with "Next",
then with "Finish".

.

from
, select the
to add it