Parkside PLGS 2012 A1 Traduction Des Instructions D'origine page 31

Yellow LED illuminated:
Battery charged to 60%
-> e. g. for overwintering)
Red + yellow LEDs fl ash:
Overheated
Red LED illuminated:
Battery defective
Connect the charger
to the Lidl Home app
Only Smart Performance
chargers can be connected
to the Lidl Home app.
Connecting the device
with the Lidl Home App
for the fi rst time requires a 2.4
GHz WLAN connection.
1. Connect the charger to the
mains supply.
The WLAN indicator (9) fl as-
hes blue when the charger
is ready to be connected to
the app.
2. Enable Bluetooth® and
WLAN on your smartphone.
3. Enable Bluetooth® on the
device by pressing and hol-
ding the ECO button (8) and
60% button (7) at the same
time for 5 seconds.
4. Open the Lidl Home App.
From here there are options
 
,
and
the charger.

If the charger is the fi rst device
you want to connect to the app:
5. On the
option "Add device".
The app scans the area for
available devices and indi-
cates if available devices
have been found.
If this is not the case,
read on if possible
6. If you select "Go to add",
the available devices are
displayed in a list.
7. Select the charger by setting
the check mark
one device at a time. If there
are other check marks for
other devices, clear the check
GB MT

to connect
tab, select the

. Select only
.
31