Parkside PLGS 2012 A1 Traduction Des Instructions D'origine page 237

GB
MT
We hereby confirm that the Battery Charger design series
Smart PLGS 2012 A1, 000001 - 098000
conforms with the following applicable relevant version of the
EU guidelines:
2014/35/EU • 2014/53/EU • 2011/65/EU* & (EU) 2015/863
In order to guarantee consistency, the following harmonised
standards as well as national standards and stipulations have
been applied:
EN 60355-1:2012/A2:2019 • EN 60335-2-29:2004/A11:2018
EN 62233:2008 • EN 62841-1:2015 Appendix K
EN 55014-1:2017/A11:2020 • EN 55014-2:2015
EN IEC 61000-3-2:2019 • EN 61000-3-3:2013/A1:2019
EN 301 489-1 V2.2.3:2019 • EN 301 489-17 V3.2.4:2020
EN 300 328 V2.2.2:2019 • EN 50663:2017 • EN 50665:2017
This declaration of conformity (22)** is issued under the sole
responsibility of the manufacturer:
* The object of the declaration described above satisfies the provisions of Direc-
tive 2011/65/EU of the European Parliament and the Council of 8 June 2011
on limiting the use of certain harmful substances in electrical and electronic
appliances.
** The last two digits of the year in which the CE marking was affixed.
236
Translation of the original EC
EN IEC 63000:2018
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim
Germany, 05.08.2022
declaration of conformity
Documentation Representative
Christian Frank