Parkside PLGS 2012 A1 Traduction Des Instructions D'origine page 25

with all of the operating and sa-
fety instructions. Use the product
only as described and for the
applications specified. Keep this
manual safely and in the event
that the product is passed on,
hand over all documents to the
third party.
Intended Use
The charger is to be used in
conjunction with a rechargeab-
le battery from the (Parkside)
X 20 V Team series. Any other
use can damage the device
and thus pose a substantial risk
to the user. This device is not
suitable for commercial use. The
warranty is void in the case of
commercial use. The manufac-
turer is not liable for damage
caused by improper use or in-
correct operation.
General Description
The illustrations can
be found on the front
fold-out page.
Overview
1 Release button
2 Button for the charge status
display
3 Battery charge level indicator
4 Rechargeable battery
5 Charger
6 Control display on charger
7 60% button
8 ECO button
9 Wi-Fi display
Battery is not included.
Technical Data
Battery
Charger .. Smart PLGS 2012 A1
Input voltage ....... 220-240 V~
Input AC frequency .. 50-60 Hz
Power consumption. .... 300 W
Output voltage ............ 20 V
Output power ............. 240 W
Output current .....max. 12.0 A
Frequency
performance ..........≤ 20 dBm
Frequency
band ...... 2400-2483.5 MHz
GB MT
25