Parkside PLGS 2012 A1 Traduction Des Instructions D'origine page 30

GB MT
Charge the battery (4)
when only the red LED on
the charge level indicator (3) is
illuminated.
Charging the battery
If warm, allow the battery
to cool before charging.
Charge the battery (4) when
only the red LED on the charge
level indicator (3) is illuminated.
1. If necessary, remove the
rechargeable battery (4) from
the device.
2. Slide the battery (4) into the
charging slot of the charger (5).
3. Plug the charger (5) into a
socket.
Charging modes:
• Quick charging
ger automatically charges in
quick charging mode.
: Press the ECO
• ECO
button (8).
• Store/overwinter: Press the
60% button (7) to charge the
battery to 60% (e. g. for over-
wintering).
30
4. Once charging is complete,
5. Remove the battery (4) from
Overview of the LED indi-
cators (6) on the charger:
Red LED fl ashes:
battery charging
: The char-
Yellow LED fl ashes:
Battery charged to < 80%
Green LED fl ashes:
Battery charged to ≥ 80%
Green LED illuminated:
Battery charged
disconnect the charger (5)
from the mains supply.
the charger (5).
Charging Smart
time PLGS 2012 A1
(min.)
2.0 Ah
120
3.0 Ah
180
4.0 Ah
240
8.0 Ah
480
ECO quick
35
38
42
48