Parkside PLGS 2012 A1 Traduction Des Instructions D'origine page 33

Upgrading the firmware
can change the features
of the app.
Features of the app
If you select the charger, this will
take you to the overview page.
• Brief overview (above)
The data apply to a battery in-
serted in the charger:
- the remaining time until the
battery has reached the speci-
fied charge level.
- the current charge level of the
battery in %.
- the current temperature of the
battery.
• Charging switch (on/off)
You stop charging the battery
when you press the charging
switch while the battery is in-
serted.
• Charging mode
Here you can select between
the different charging modes:
Performance, Balance, ECO
and Expert.
The charging current adapts to
the charging mode.
In Expert mode you can determi-
ne the charging current yourself
by selecting it while the battery
is inserted, selecting the desired
value from the list provided and
confirming it.
• Current charging current
The current charging current is
shown here.
• Charging voltage
The current charging voltage is
displayed here.
• Storage
Here you can optimally charge
batteries for storage.
• Push notifications
Here you can select to receive a
notification on your smartphone:
- when the battery exceeds the
overtemperature limit. To do
this, select the "Overheated"
field.
- when the battery is fully
charged. To do this, select the
"100% charged" field.
- 10 minutes before charging is
completed. To do this, select
the "10 min. until fully char-
ged" field.
• °F/°C switch
GB MT
33