Parkside PBH 1050 D4 Mode D'emploi page 32

Clean the SDS-Plus tool holder
o
Lightly grease the SDS-Plus tool holder with
drill chuck grease
[
˜ Maintenance
If replacement of the mains connection cable
is necessary, this must be carried out by the
manufacturer or his representative in order to
avoid safety hazards.
Check the product and accessories (e.g.
o
tools) for wear and damage before and
after each use. Replace them with new
ones if necessary. Observe the technical
requirements (see "Technical data").
Greasing: Lightly grease the SDS-Plus tool
o
holder with drill chuck grease
[ ]
˜ Repair
This product does not contain any parts
o
that can be repaired by the user. Contact
an authorised service centre or a similarly
qualified person to have it checked and
repaired.
˜ Storage
Switch off the product. Let the product cool
o
down.
Clean the product (see "Cleaning").
o
Store the product and its accessories in a
o
dark, dry, frost-free, well-ventilated place.
Always store the product in a place that is
o
inaccessible to children.
The ideal long term storage (longer than
o
3 months) temperature is between +20 and
+26 °C.
Store the product in its carrying case.
o
˜ Transportation
Switch off the product. Let the product cool
o
down.
Transport the product in its carrying case.
o
32 GB/IE
regularly.
[ ]
.
]
.
[ ]
Protect the product from any heavy impact
o
or strong vibrations which may occur during
transportation in vehicles.
Secure the product to prevent it from slipping
o
or falling over.
˜ Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a)
and numbers (b) with following
meaning: 1–7: plastics/20–22: paper
and fibreboard/80–98: composite
materials.
Product:
The product and packaging materials are
recyclable and are subject to extended producer
responsibility.
Dispose them separately, following the illustrated
Info-tri (sorting information), for better waste
treatment.
The Triman logo is valid in France only.
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product.
To help protect the environment, please
dispose of the product properly when
it has reached the end of its useful
life and not in the household waste.
Information on collection points and
their opening hours can be obtained
from your local authority.