Télécharger Imprimer la page

Parkside PBH 1050 D4 Mode D'emploi page 27

Masquer les pouces Voir aussi pour PBH 1050 D4:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 35
Maintain power tools diligently.
e)
Check for misalignment or binding
of moving parts, breakage of parts
and any other condition that may
affect the power tool's operation.
If damaged, have the power tool
repaired before use. Many accidents
are caused by poorly maintained power
tools.
Keep cutting tools sharp and clean.
f)
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
Use the power tool, accessories
g)
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of
the power tool for operations different from
those intended could result in a hazardous
situation.
Keep handles and grasping surfaces
h)
dry, clean and free from oil and
grease. Slippery handles and grasping
surfaces do not allow for safe handling and
control of the tool in unexpected situations.
Service
Have your power tool serviced by
a)
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
NOTE
This product produces an electromagnetic
u
field during operation! This field may under
some circumstances interfere with active or
passive medical implants! To reduce the risk
of serious or fatal injury, we recommend
persons with medical implants to consult
their doctor and the medical implant
manufacturer before operating this product!
˜ Hammer safety warnings
m
WARNING!
Wear hearing protection! Exposure to
loud noise can lead to hearing loss.
Wear a dust mask.
m
WARNING!
Drilling and chiseling operations may deal
u
with materials which can produce harmful
or toxic dust. It presents a health hazard for
the person operating the power tool and
anyone else in the vicinity.
Ensure that you are not likely to hit power,
u
gas or water supply lines when you are
working with the power tool. If necessary,
check with a service line detector before
you start to cut or drill into a surface.
Safety instructions for all operations
Wear ear protectors. Exposure to noise
 
can cause hearing loss.
Use auxiliary handle(s), if supplied
 
with the tool. Loss of control can cause
personal injury.
Hold the power tool by insulated
 
gripping surfaces, when performing
an operation where the cutting
accessory or fasteners may contact
hidden wiring. Cutting accessory or
fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live"
and could give the operator an electric shock.
GB/IE
27

Publicité

loading

Ce manuel est également adapté pour:

Hg09738