Technical Data; Noise Information - PrimAster PMAAS 40 Manuel D'utilisation

GB ENGLISH

TECHNICAL DATA

Battery Pruning Saw
Chain
Guide bar type
Usable cutting length
Chain oil tank capacity
Battery voltage
Weight with battery (without cutting tool and shoulder strap)
Vibration details
Vibration total values (triaxial vector sum) determined according to ISO 22867,
Uncertainty K = 1,5 m/s
Vibration emission value a

Noise information

Measured according to
Sound pressure level L
Measured sound power level L
Guaranteed sound power level
Recommended battery types
Recommended charger
Technical changes reserved.
WARNING: The declared vibration total value(s) and the declared noise emission value(s) were measured according
to a standardized test method according to EN 60745 and can be used to compare one power tool with another. The
declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly
increase the exposure level over the total working period. The vibration emission level will vary because of the ways in
which a power tool can be used and may increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down or when
it is running but not actually in use. This may significantly reduce the vibratory load over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work patterns.
24
2
h
EN 60745; 2000/14/ EG+2005/88/EC
1) 2)
Unsicherheit K = 3 dB (A)
1)
pA
2) Uncertainty K =
WA
2,6 dB (A)
PMAAS 40
Oregon 91PO33X
080SDEA318
203 mm/8"
65 cm3
40 V
3,2 kg
<2,5 m/s
2
90 dB (A)
99,4 dB (A)
102 dB (A)
Typ LI 25; LBA40120/
LBA40240
CGA402, CGA405