Repair Service; Waste Disposal And Environmental Protection; Technical Data; Warranty - PrimAster PMWH 3000 Manuel D'utilisation

10. Repair Service

Attention! Electrical repairs may only be carried
out by a skilled electrician or a customer service
workshop!
If you send the machine to us for repair, please describe
the fault.

11. Waste disposal and environmental protection

Dispose of the machine properly after it is worn out. Dis-
connect the mains cable in order to prevent misuse. Do
not dispose of the machine with the household waste. In
the interest of environmental protection, take it to a col-
lection point for electric machines. Your responsible local
authority can provide you with addresses and operating
times. Also take the packaging materials and worn out
accessories to the appropriate collection points.
Only for EU countries
Do not discard electric tools in the household
waste!
In accordance with European Directive 2012/19/EC on
waste electrical and electronic equipment and its imple-
mentation in national law, waste electric tools must be col-
lected separately for environmentally-compatible re-use.
Recycling alternative to the return invitation:
Instead of returning the electric equipment, the owner is
alternatively obligated to take part in the proper recycling
in the case of relinquishment of ownership. The waste
equipment can also be taken to a collection facility which
disposes of it in the sense of the national recycling man-
agement and waste acts. This does not pertain to the ac-
cessory parts and auxiliary equipment without electrical
components accompanying the waste equipment.

12. Technical Data

Electric Silent Shredder
Nominal voltage
Nominal frequency
Nominal power
No-load speed
Max.branch diameter
Collecting container
Weight
Sound pressure level
EN 50434:2014
Sound power level L
WA
2000/14/EG
Service life S6/40% (full load: 40 sec., no-load: 60 sec.)
Class of protection I; Degree of protection IPX4
Technical and visual changes can be made during the
course of the further development and without prior notice.
All information given in these instructions for use are there-
fore given without guarantee. Legal claims, which are based
on the instructions for use can therefore not be made.
GB | Operating Instructions
PMWH 3000 Primaster
V~ 230-240
Hz 50
W 3000 (S6/40%)
rpm 60
mm ≤44
liter 60
kg 23,5
dB(A) 70,3 (K=3,0 dB)
dB(A) 92
Note: The above specifications are the MAXIMUM ca-
pacities of the tool. The maximum branch diameter de-
pends on the hardness of the wood.

13. Warranty

For this tool, the company provides the end user - inde-
pendently from the retailer's obligations resulting from
the purchasing contract - with the following warranties:
The warranty period is 84 months beginning from the
hand-over of the device which has to be proved by the
original purchasing document. Wearing parts and defects
caused by the use of not fitting accessories, repair with
parts that are no original parts of the manufacturer, use
of force, strokes and breaking as well as mischievous
overloading of the motor are excluded from this warranty.
Warranty replacement does only include defective parts,
not complete devices. Warranty repair shall exclusively
be carried out by authorized service partners or by the
company's customer service. In the case of any interven-
tion of not authorized personnel, the warranty will be held
void. The warranty shall not apply to commercial use of
the product.
All postage or delivery costs as well as any other subsequent
expenses will be borne by the customer.
14. EC Declaration of Conformity
We, ikra GmbH, Schlesier Straße 36, D-64839 Mün-
ster - Germany, declare under our sole responsibility
that the product Electric Silent Shredder PMWH 3000
Primaster, to which this declaration relates correspond
to the relevant basic safety and health requirements of
Directives 2006/42/EC (Machinery Directive), 2014/30/
EU (EMC-Guideline), 2011/65/EU (RoHS-Guideline) and
2000/14/EC+2005/88/EC (noise directive) incl. modifica-
tions. For the relevant implementation of the safety and
health requirements mentioned in the Directives, the fol-
lowing standards and/or technical specification(s) have
been respected:
EN 60335-1:2012/A2:2019;
EN 50434:2014;
EN 55014-1:2017;
EN 55014-2:2015;
EN IEC 61000-3-2:2019;
EN 61000-3-3:2013/A1:2019;
EN IEC 63000:2018
measured acoustic capacity level
guaranteed acoustic capacity level
Conformity assessment method to annexe V / Directive
2000/14/EC
The year of manufacture is printed on the nameplate and can be
additionally retrieved via the consecutive serial number.
Münster, 18.08.2021
Matthias Fiedler, Senior Product Manager Ikra GmbH
Maintenance of technical documentation:
Ikra GmbH, Matthias Fiedler
Schlesierstrasse 36
64839 Münster, Germany
GB-8
90,1 dB (A)
92 dB (A)