Publicité
Les langues disponibles
Les langues disponibles
□
Briefly press the HISTORY button 17 .
The hourly display 29 shows the value of the past hour (-1).
□
Press the HISTORY button 17 again.
Each time you press the HISTORY button 17 the hourly display 29 moves
back another hour (or 2, or 3, etc.).
The hourly display value 29 indicates the air pressure 4 hours previously, for example.
● Trends
Air pressure trend
The air pressure trend display 28 shows you the air pressure trend.
Temperature trend and air humidity trend
The radio-controlled weather station trend display 36 and the outdoor sensor trend display
shows you the temperature and air humidity trend.
50
● Configuring the alarm function
The product features two alarm functions that can be separately configured.
□
Press the SET button 12 to toggle between the two alarm functions.
□
Confirm your selection by pressing and holding the SET button 12 .
The hour display starts to flash.
□
Press the arrow up 13 or arrow down button 14 to set the desired hour.
□
Confirm your selection by pressing the SET button 12 .
□
Press the arrow up 13 and arrow down button 14 to set the desired minute.
□
Confirm your selection by pressing the SET button 12 .
The time of one alarm function has been configured.
Note: The alarm function must be manually activated to become active (see section "Acti
vating/deactivating the alarm function").
● Activating/deactivating alarm functions
The bell icons 47 44 indicate whether an alarm function is activated or deactivated (see
Fig. D).
□
Press the SET button 12 to toggle between the two alarm functions.
Operation
GB/IE/NI
17
Publicité
