Yamaha 70B Manuel D'utilisation page 110

4) Once the engine is supported with the
tilt-support lever, push the power
trim/tilt switch DOWN to retract the
trim rods.
cC
Be sure to retract the trim rods complete-
ly during mooring. This protects the rods
from marine growths and corrosion
411014
which could damage the power trim/tilt
mechanism.
EMG64110
PROCEDURE FOR TILTING DOWN
Power trim and tilt model
1) Push the power trim and tilt switch
"UP" until the engine is supported by
the tilt rod.
2) Release the tilt-support lever.
3) Push the power trim and tilt switch
"DN" (Down) to lower the engine to
411021
the desired position.
3-24
GB