Publicité
Les langues disponibles
Les langues disponibles
12. Check that all calibrations are completed
properly.
When all calibrations are completed properly, the
screen shown in the figure is displayed.
13. Press the [ON/OFF] button on the control
panel until the screen goes off.
Automatic calibration is now completed.
Setting Date and Time
1.
Press the [ON/OFF] button.
2.
Press [USER FUNCTIONS].
3.
Press [ADMIN], and then [PASSWORD].
Enter the administrator password [123456] (default), and then press [OK].
4.
Press [GENERAL], [CLOCK] and [DATE/TIME].
5.
Enter the values for year, month, date, hour and minute, and then press [OK].
6.
Shut down the equipment by pressing the [ON/OFF] button until you hear a sound.
7.
Turn the main power switch OFF.
© 2012 - 2014 TOSHIBA TEC CORPORATION All rights reserved
21 / 21
e-STUDIO2050C/2550C/2051C/2551C
Publicité
