Toshiba e-STUDIO2050C Guide D'installation page 19

8. The fuser unit thermistor correction is
performed.
The screen shown in the figure is displayed
during calibration.
9. The automatic gamma adjustment for
copying is performed.
1) Place A4 or LT paper in the drawer.
2) Press [OK].
The test chart for calibration is output.
© 2012 - 2014 TOSHIBA TEC CORPORATION All rights reserved
A4
LT
18 / 21
A4-R
LT-R
e-STUDIO2050C/2550C/2051C/2551C