Toshiba e-STUDIO2050C Guide D'installation page 16

 Automatic Setup
Never turn the power OFF with the main power switch until the automatic setup has been completed.
1. Turn the power ON with the main power
switch.
2. Press [OK] on the AUTHENTICATION screen.
* A password is unnecessary.
3. When the screen shown in the figure appears,
press [OK].
4. When the status of the screen becomes
similar to that shown in the figure, press
[OK].
When the center row of the screen with voltage
values (V) is filled, press [OK].
5. Install the toner cartridges.
© 2012 - 2014 TOSHIBA TEC CORPORATION All rights reserved
15 / 21
e-STUDIO2050C/2550C/2051C/2551C