Conformity; Technical Features; Electrical Features; Packaging Content - aqua Technopool3 Mode D'emploi

TECHNOPOOL3
Dosing systems for swimming pools
1.2 C
ONFORMITY
Our pumps are manufactured according to General Standards in force and in compliance with the following
European Directives:
 n° 2004/108/CE " e s.m.i.
 n° 2006/95/CE "DBT Low Voltage Directive" e s.m.i.
 n° 2011/65/UE , 2012/19/UE "direttive RoHs e WEEE" e s.m.i.
To achieve the best and ensure the longest durability of the system, read and follow the rest of the manual
especially the part relative to maintenance.

The manufacturer declines any responsibility for damages on the system caused by non-qualified
personnel.
1.3 T
ECHNICAL FEATURES

Back-lit LCD display 2x16.

Red LED (pH) pH alarm signal.

Red LED (Rx-ppm) redox alarm signal (only for Time/pH/Rx and pH/Rx Technopool3 systems).

Red LED (Rx-ppm) chlorine alarm signal (only for pH/ClJ Technopool3 systems).

Red LED (Rx-ppm) hydrogen peroxide alarm signal (only for pH/HP Technopool3 systems).

Main ON/OFF switch.

Dose enable switch for each pump.

Solenoid valve output (dry contact, no voltage).

Flow sensor input.

Three inputs for level probes.

An input for temperature probe PT 100.

A BNC input for pH electrode.

A BNC input for redox electrode (only for Time/pH/Rx and pH/Rx Technopool3 systems).

A HIRSCHMANN input for chlorine electrode (only for pH/ClJ Technopool3 systems).

A HIRSCHMANN input for hydrogen peroxide electrode (only for Technopool3 pH/HP systems).

Alarm repetition output 24VDC.
Hereunder are the maximum pump capacities:

4 L/h @ 1 bar, Santoprene® tube.
1.4 E
LECTRICAL FEATURES

Power supply: 100÷240 VAC 50/60 Hz and consumption (max): 14 W.
 pH Range: 0.00...14.00.

Redox Range: 0...1000 mV (only for Time/pH/Rx and pH/Rx Technopool3 systems).
 Chlorine range: 0.00...20.00 ppm (only for Technopool3 pH/ClJ systems).
 Hydrogen peroxide range: 0.0...500.0 ppm (only for Technopool3 pH/HP systems).
 Temperatura range (PT100): 0...100° C.
1.5 P
ACKAGING CONTENT

Technopool3 System.

Instruction manual.

Wall mounting bracket.

Screws and wall plugs for wall fixing.

pH 4 buffer solution.

pH 7 buffer solution.

475mV buffer solution (only for Time/pH/Rx and pH/Rx Technopool3 systems).

pH electrode with 5 m cable.

Redox electrode with 5 m cable (only for Time/pH/Rx and pH/Rx Technopool3 systems).

Chlorine electrode with 5 m cable (only for pH/ClJ Technopool3 systems).

Hydrogen peroxide electrode with 5 m cable (only for pH/HP Technopool3 systems).

3-wire temperature probe PT100 with 5 m cable.

DN50 collars (4pcs).

Suction filter (2 or 3 pcs).

Injection valve (2 or 3 pcs).

Probe holder (1 or 2 pcs).

Suction and delivery tubes.
ADSP7000570 rev. 1.6

1 L/h @ 3 bar, Silicone tub
09/01/2014
INTRODUCTION
ENGLISH
37/136