Publicité
Setting the width adjustment
First push the side pod in (see fig.18), then pull the side pod adjustment lever
and set it to one of the three width-settings (see fig.19). Repeat the
operation on both sides.
1
Fig.19
650mm
Filling the clean-water tank
The TTV-678 is equipped with a large capacity 110 litre clean-water tank allowing, for large areas to be covered
in a single fill.
2
To fill the clean-water tank, lift the cover flap (fig.20) to expose the filler cap.
Unscrew the filler cap (fig.21) and fill the tank using a hose (fig.22) or preferred method.
Note: Great care must be taken to ensure that contaminants (leaves, hair, dirt, etc.) are not allowed to enter the
clean-water tank during the filling process. If using a bucket or similar, ensure it is always clean and free from
debris.
Fig.23
14
Fig.20
Fill-level indicator
The water level in the clean water tank can be measured using
the scale on the rear of the machine (fig.23).
235670 09/13 (A12)
750mm
Fig.21
Fig.18
850mm
Fig.22
Publicité
