Publicité
Les langues disponibles
Les langues disponibles
76
installation instructions
General
The fitting of the appliance should only be carried out by a registered Corgi
gas fitter.
Please note:
The type of gas and the country for which the appliance has been designed are
indicated on the ratings plate.
This is a category 3 appliance.
Gas connection
Please note:
The gas connection must comply with national and local regulations.
•
•
We recommend that the hob be connected by means of a fi xed pipe.
Connection using a specially designed safety hose is also permitted.
•
Behind an oven use must be made of a pipe made entirely out of metal.
A safety hose may not be bent and must not come into contact with moving
•
parts of kitchen units.
•
In all cases the connection tap for the appliance must be positioned such that
it is easily accessible.
Before using the appliance for the fi rst time check the connections using water
•
and washing-up liquid to ensure that there are no gas leaks.
The hose should not be allowed to come in contact with parts with a
•
temperature above 65 ˚C.
•
The hose may not be twisted or pulled and may not be narrowed or have
narrow curves.
•
The hose should not come in contact with sharp objects.
The hose must be accessible over the entire length to check upon its state.
•
Replace the hose before the indicated date on the hose.
•
•
The bottom of the hob becomes hot.
Publicité
