Publicité
Les langues disponibles
Les langues disponibles
INTRODUCTION
Dimensions
FRONT VIEW
INTRODUCTION
BOTTOM VIEW
INTRODUCTION
Specifications
Compliance
CAPXLV2 Capacity
Supply Voltage 1 (VIN Connector)
Supply Voltage 3 (AC/DC converter)
Supply Voltage 2 (POE)
INTRODUCTION
PoE Supply Connector Configuration
Operating Temperature
Operating Humidity Range
Storage and Shipping Temperature
Enclosure
Wiegand Inputs* (4)
INTRODUCTION
Relay Contacts (8)
OSDP
Accessory Compatibility
Network Compatibility
Bluetooth
®
Wi-Fi Compatibility
Wi-Fi Security
WiFi Range (w/ external antenna)
Mobile Credentials
Built-in Liftmaster Passport Receiver
Wireless Communication to Gate Operator
Video Camera
*NOTE: Only the 26-bit Wiegand protocol and OSDP protocol are compatible in UL installations. Wi-Fi is supplemental for UL installations.
Supply Voltage 1 - for UL installations use only ITE Listed, power limited, power supply manufactured by Shenzhen Geao technology Co. Ltd, Model
QX72W240300D3.
Power Supply Voltage 2 - for UL installations must be connected to UL 294 or UL 603 Listed power supply or UL 294 POE injector with 0 hours
(minutes) battery back-up.
ACCOUNT SETUP
ACCOUNT SETUP
ACCOUNT SETUP
UL294
Resident Capacity 50,000 / Local Event History 50,000
24V DC 72W (3A) MAX. The 24v power supply provided in the box is recommended.
120 VAC, 1.5 A, 60 Hz
42-55VDC 802.3BT Type 3 Class 5 or Class 6
ACCOUNT SETUP
Alternative B (or Mode B)
-20-50C
20% to 85 +/-5% RH
-40-85C
Front (Aluminum), Rear (Carbon Steel)
26-bit, *30-bit, *32-bit Mifare, *36-bit Mifare, *56-bit Mifare, *37-bit with and without facility
ACCOUNT SETUP
code, and ASCII (for keypads). 12VDC, 250mA power output (per input)
SPDT 3A @ 30VDC (each)
OSDP 2.2, 12 Vdc, 1.3 A max (total)
OSDP Interface (1): connected up to 4 recommended OSDP readers in daisy chain configuration
We are working to optimize the product to support up to 8 OSDP readers in a future firmware
release. Please check the firmware release notes for more information.
Refer to the accessory page for compatible accessories
10/100 Ethernet
Version 5.0
802.11 a/b/g/n and 802.11ac 2.4GHz / 5GHz
CAPXLV2 is compatible with routers using the following security protocols: WPA3-SAE, WPA2-
PSK/WPA3-SAE, WPA2-PSK, or WPA/WPA2-PSK
Up to 500 feet (152.4 m), Open Air/Line-of-Sight (range will vary depending on obstructions and
2.4GHz/5GHz router type)
Minimum configuration: Bluetooth Technology employing myQ Community app version 3.4.0 or
above. The smart phone must have these minimum operating system versions - iOS 15, 16 or
17, Android 7 (Nougat) - Android 13. Access to the wireless electronic device (i.e., smartphone,
tablet, etc.) must be secured by either a PIN password or biometric feature. When a mobile
device is used to gain access, the credential is identified as "mobile" in the associated myQ
Community "credential type" field.
Security+ 2.0
Up to 750 feet (228.6 m), Open Air/Line-of-Sight (range will vary depending on obstructions),
Compatible with LiftMaster Security+ 2.0
(firmware v4.4 and later), HD Operators (firmware v3.3 or later). NOT compatible with LiftMaster
Barrier Gate Operators.
1080p, Viewing angle - 135 degree diagonal, Up to 1,000 30-second temporary video events
stored locally
POWER
NETWORK/MOUNTING
SIDE VIEW
POWER
NETWORK/MOUNTING
POWER
NETWORK/MOUNTING
POWER
NETWORK/MOUNTING
POWER
NETWORK/MOUNTING
gate operators, 2018 LiftMaster Gate Operators
®
8
ACCESS CONTROL
BACK VIEW
ACCESS CONTROL
ACCESS CONTROL
ACCESS CONTROL
ACCESS CONTROL
Publicité
