Publicité
Les langues disponibles
Les langues disponibles
INTRODUCTION
3
Install Antennas
The Security+ 2.0
opposite sides of the CAPXLV2. Optional antenna cable kits are available for remote antenna mounting (refer to accessories).
INTRODUCTION
Security+ 2.0
Used with LiftMaster Passport Security+ 2.0
operators.
1. Remove 3/8" knockout on the back of the CAPXLV2.
INTRODUCTION
2. Secure the radio antenna to the desired knockout on the CAPXLV2.
3. Connect the radio antenna cable to the main board as shown.
Wi-Fi
Antenna (if applicable), (optional accessory WFBTEXT)
®
Used for Wi-Fi
1. Remove 1/4" knockout on the back of the module.
2. Secure the Wi-Fi
3. Connect the Wi-Fi
ACCOUNT SETUP
radio antenna and Wi-Fi
®
®
ACCOUNT SETUP
Radio Antenna (if applicable), (included in the package)
®
ACCOUNT SETUP
Internet.
®
antenna to the desired knockout on the CAPXLV2 with the provided gasket, washer, and nut.
®
antenna cable to the main board as shown.
®
POWER
NETWORK/MOUNTING
antennas must be a minimum of 8 inches (20 cm) apart. Install the antennas on
POWER
NETWORK/MOUNTING
and wireless communication with LiftMaster UL325 2016 compliant gate
®
POWER
NETWORK/MOUNTING
Main Board
Main Board
13
ACCESS CONTROL
ACCESS CONTROL
ACCESS CONTROL
Publicité
