GreenWorks Tools G40LM35K2 Manuel D'utilisation Et De Sécurité page 4

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
■ Do not operate the machine
in wet grass or in the rain.
■ Keep in mind that the operator
or user
for accidents or hazards
occurring to other people or
their property.
GARDEN TOOLS USE AND
CARE
■ Before using, always visually
inspect to ensure blades,
blade bolts,
assembly are not worn or
damaged.
■ Replace worn or damaged
blades and bolts in sets to
preserve balance.
■ Check all nuts, bolts, and
screws at frequent intervals
for proper tightness to be
sure the equipment is in safe
working condition.
■ Check the grass catcher
frequently
deterioration.
■ Replace worn or damaged
parts.
■ Do not leave the battery in
the mower in direct sunlight.
■ Do not force the machine.
It will do the job better and
safer at the speed for which
it was designed.
■ Do not overload your mower.
Mowing long thick grass
English (Original Instructions)
is responsible
and cutter
for wear
may cause the motor speed
to drop, or the power to cut
out. When mowing in long
thick grass a first cut with the
cutting height set higher will
help reduce the load.
■ Stop the blade when crossing
gravel surfaces.
■ Do not pull the mower
backward unless absolutely
necessary. If you must back
the machine away from a wall
or obstruction, first look down
and behind to avoid tripping
or pulling the machine over
your feet.
■ Stop the blade(s) if the
machine has to be tilted for
transportation when crossing
surfaces other than grass,
and when transporting the
machine to and from the area
to be mowed.
■ Never operate the machine
or
with defective guards or
shields, or without safety
devices,
deflectors and/or grassboxes,
in place.
■ Switch
according to instructions and
keep hands and feet away
from cutting area.
■ Never pick up or carry a
lawnmower while the engine
is running.
3
for example,
on the motor