Publicité
Les langues disponibles
Les langues disponibles
IDENTIFICATION NUMBER LOCATION
The model and identification numbers of your
outboard motor are stamped on a plate
attached to the clamp bracket. Record these
numbers below for future reference. It is impor-
tant to know these numbers when you place a
parts order or if your motor is stolen.
Model Number:
Identification Number:
Ignition Key Number:
Spare key
56
Ignition key number
stamped position
EMISSION CONTROL
INFORMATION
NOTICE
• THIS ENGINE IS CERTIFIED TO OPER-
ATE ON UNLEADED GASOLINE OF 87
OCTANE
((R+M)/2
GREATER.
• EXHAUST EMISSION CONTROL
SYSTEM:
ECM, MFI
TROUBLESHOOTING
This troubleshooting guide is provided to help
you find the cause of common complaints.
NOTICE
Failure to troubleshoot a problem cor-
rectly can damage your outboard motor.
Improper repairs or adjustments may
damage the outboard motor instead or
fixing it. Such damage may not be cov-
ered under warranty.
If you are not sure about the proper
action to correct a problem, consult your
Suzuki marine dealer.
Starter motor will not operate:
• Shift lever is not in NEUTRAL.
• Fuse is blown out.
• Emergency stop switch lock plate is not in
position.
Engine will not start (hard to start):
• Fuel tank is empty.
• Fuel hose is not properly connected to
engine.
• Fuel hose is kinked or pinched.
• Spark plug is fouled.
Engine idles unstably or stalls:
• Fuel hose is kinked or pinched.
• Spark plug is fouled.
METHOD)
OR
Publicité
