Publicité
Les langues disponibles
Les langues disponibles
NOTICE
Use of improper spark plugs or improp-
erly tightening spark plugs can cause
severe engine damage.
• Do not experiment with other spark
plug brands unless you can determine
that they are directly equivalent to the
specified brand, or you may experience
engine damage which will not be cov-
ered under warranty. Note that after-
market cross-reference charts may not
be accurate.
• To install a spark plug; seat it as far as
possible by hand, then use a wrench to
tighten it to either the recommended
torque setting or the specified rotation
angle.
Tightening torque
1.5 – 1.9 kg-m (10.8 – 13.7 lb-ft)
Rotation angle
New plug
Re-use plug
• Do not overtighten or cross-thread a
spark plug, as this will damage the alu-
minum threads of the cylinder head.
44
1/2 – 3/4 of a turn
1/12 – 1/8 of a turn
To maintain a strong spark, you should clean
and adjust the plug at the interval shown in the
maintenance schedule.
Remove carbon deposits from the spark plug
using a small wire brush or spark plug cleaner,
and adjust the gap as follows:
Spark plug gap
If the electrode or insulator is damaged, or if
either shows excessive wear, then the spark
plug should be replaced.
0.8 – 0.9 mm
(0.031 – 0.035 in.)
Publicité
