Publicité
Les langues disponibles
Les langues disponibles
9027525
SPECIFICATIONS
Horsepower
Voltage rating
Amperage rating
Phase
Frequency rating
Number of speeds
Speed rating
Chuck size
Spindle travel
Spindle taper
Max. spindle to base
Capacity
Magnet
Magnet size
Holding force
Vibration total value
Base size
Overall size
Net weight
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual.
A notice is an alert that there is a possibility of property damage, injury
or death if certain instructions are not followed.
DANGER!
This notice indicates an immediate and specific hazard that
will result in severe personal injury or death if the proper
precautions are not taken.
WARNING! This notice indicates a specific hazard or unsafe practice
that could result in severe personal injury or death if the
proper precautions are not taken.
2
Magnetic Drilling and Tapping Press
2 HP
110V AC
14A
1
60 Hz
Variable
Low: 100 to 265 r/min
High: 200 to 500 r/min
1/2 in.
4-11/16 in.
MT2
4-9/64 in.
Annular cutter: 2 x 2 in.
Twist drill: 1/2 in. (Morse Taper: 3/4 in.)
Tapping: 3/4 in.
56W
7-7/8 x 3-7/8 in.
3,034 lb (at 20°C with 1 in. thick material)
A W = 3.562 m/s²
7-7/8 x 3-7/8 in.
7-11/16W x 12-3/8D x 23-1/16H in.
33 lb
For technical questions call 1-800-665-8685
V1,1
Publicité
